Gaskets from AWWA C111/A21.11 Compliant EPDM from American Biltrite

Customers seeking gaskets for drinking water systems and related applications now have another material choice available from CRG: we are now producing gaskets using AWWA C111/A21.11 compliant material from American Biltrite. American Biltrite AB-576 EPDM sheet complies with the requirement of the American Water Works Association (AWWA), as well as being certified to the NSF 61-2013 standard.

The AWWA C111/A21.11 standard provides the minimum requirements for rubber-gasket joints for ductile-iron pressure pipe and ductile-iron and gray-iron fittings, including requirements and inspection.The NSF/ANSI 61 standard establishes minimum criteria for impurities and contaminants that may be released indirectly into drinking water from products, components and materials, including joining and sealing materials such as gaskets and seals.

Gaskets from AWWA C111/A21.11 Material: About AB-576 Sheet

Increasingly, CRG is being asked to produce gaskets from AWWA C111/A21.11 compliant material. Buyers are now seeking gaskets produced from materials that satisfy the requirements of both AWWA C111/A21.11, as well as NSF 61. Gaskets and seals produced from AB-576 sheet will meet all your water sealing needs. Made from EPDM polymer, products fabricated from AB-576 sheet will service a temperature range from -40°F (-40°C) to 275°F (135°C). The sheet has a maximum pressure rating of 250 psig (17 bar). One of the most important properties of AB-576 sheet is its ability to resist compression set – this sheet exhibits optimum compression set values of 20% maximum for 22 hours at 70°C.

Gaskets, seals and parts produced from AB-576 sheet have outstanding resistance to heat, ozone and sunlight, with superior resistance to water and steam and good flexibility at low temperatures. All of these properties make AB-576 sheet a preferred choice for gaskets for drinking water systems and related applications.

Applications that CRG can service with parts produced from AB-576 sheet include the following:

If you are seeking gaskets from AWWA C111/A21.11 material, consider CRG for all your needs. CRG manufactures gaskets, seals and parts from AB-576 sheet using advanced production technology, including waterjet and flex/flash cutting. All products are made to customer requirements, and our production process ensures conformity to specifications and tight tolerances. To find out more about CRG gaskets from AWWA C111/A21.11 material, please contact our sales department at crg@canadarubbergroup.com.

RELATED ARTICLES

Aggressive Medias & Environments

Gaskets for Aggressive Chemicals

Aggresive chemicals, such as acids, and alkalis, represent hazards to personnel and the environment When selecting a gasket for aggresive chemical...

Aggressive Medias & Environments

Gaskets for Chlorine Dioxide Service

Chlorine dioxide is widely used as a bleaching agent in the pulp and paper industry This chemical also has widespread use as a disinfectant in the...

Sealing Solutions

Rubber Compounds: Choosing the Best Material for your Application

CRG fabricates a wide variety of end-use products from an array of materials A common material category we work with is rubber compounds Rubber compounds...