At Canada Rubber Group Inc. (CRGI), we are often asked to describe the array of industrial rubber products that we can supply. While our portfolio of industrial rubber products is both broad and deep, the categories below highlight the main types of product solutions we can supply.
Seals and Gaskets**.** We can supply all types of gaskets and gasket materials including rubber, cork, non-asbestos, paper fibre, sponge, foam, etc. Gaskets can be hand cut for special sizes or shapes, or CNC cut on our water jet or flex/flash cut equipment for precise conformity to specifications and tolerances. We can handle both small and large quantity runs, and emergency service is available on request.
Sponge, foam, and stripping. We specialize in products fabricated from both closed and open cell sponge and foam for automotive use, buildings, doors, windows, or commercial or industrial equipment customized to your application and the specifications. Products can be supplied with adhesive-based backings if required.
Rubber Sheet**.** We supply a wide variety of sheet rubber compounds. Most standard compounds such as SBR, Neoprene, EPDM, and BunaN (Nitrile), FKM (fluoroelastomer), Pure Gum, Red Sheet, NSF-61, and food-grade silicone are available. Rubber sheet is available in thicknesses ranging from 1/32” thick to ½’ thick are available in standard widths of 36” and 48”, with some thicknesses available in 72” widths. Our rubber sheet is sold by the full roll, or can be cut your requirements.
Rubber Slab**.** Typical applications for rubber slab are conveyor belt scrapers or chute linings. We can supply rubber slab in thicknesses ranging from 5/8” thick to 2” thick. Laminations are also available. Rubber slab is available in SBR, Neoprene, and Pure Gum. The slab can be cut to size or supplied by the full roll
Wear-Resistant Rubber**.** These compounds are an excellent choice for abrasive applications, such as chute and launder lining. A variety of thicknesses are available.
Fabricated Rubber Products. CRGI custom fabricates an array of industrial rubber products using a variety of fabrication techniques such as slitting, hole cutting, slotting, beveling, laminating, skiving, bonding, and die cutting. Applications we have serviced include automotive applications and general industrial applications. Some examples of industrial rubber products we have fabricated include skirt board rubber, conveyor belt scrapers, dust seals, street sweeper curtains, chute and launder linings, scrapers, snow plow blade deflectors, etc.
Molded and Extruded Rubber Products. For over 25 years, CRGI has been supplying automotive rubber products and parts to many of the world’s leading automakers and their suppliers. Automakers we have supplied automotive rubber products and parts to include General Motors, Ford, Chrysler, Nissan, Mazda, BMW, Honda, Toyota, and Volvo. Rubber products and parts that we have supplied include gaskets and seals, pedal pads, isolators and dampers, plenum plugs, grommets, and kiss-cut ant-vibration pads.
Matting**.** CRGI supplies a wide range of industrial rubber matting. Matting types we supply includes vinyl and rubber runner matting, safety matting, work station mats, anti-fatigue mats, roof walkways, interlocking, switchboard mats, anti-static mats, entrance mats, poolside mats, and food service matting.
Rubber Conveyor Accessories**.** We can supply conveyor belt cleaners, skirt board rubber, scraper rubber, transfer point systems, belt trackers, impact beds, conveyor idler rolls and more.
Conveyor Belting**.** We can supply most styles of conveyor belting, either stock or fabricated, supplied with sidewalls, holes for elevator buckets, hot vulcanized endless, etc.
Noise, Vibration and Harshness (NVH) Products. CRGI produces a wide range of materials for reducing noise, vibration and harshness. These materials include rubber, cork, foam, foam/film laminates, and felt. NVH materials and parts are widely used in automotive applications. Parts fabricated from NVH materials are often used to dampen and deaden the sources of noise and vibration in vehicles. Outside of automotive applications, customers in a wide variety of industries can also benefit from using NVH materials and parts to reduce the noise and vibration emanating from process equipment and machinery. Loading bearing pads are another product that we fabricate from NVH materials.
For further information on any of the industrial rubber products we can supply, please contact our sales department at crg@canadarubbergroup.com.